Mounting - Magtek mDynamo Installation And Operation Manual

3 - Mechanical Integration
The device should be installed such that cardholders have a full, unobstructed view of the housing around
the card insertion slot opening ("entry zone") prior to insertion. This is to allow cardholders to easily
detect suspicious objects in or around the card slot entry, such as bugs / skimmers / tapping mechanisms,
and their wires or antennas. Installation height and pitch are factors in meeting this requirement.
3.4

Mounting

mDynamo with Outdoor Bezel is an IP34 rated device. Mounting is dependent on customer design;
however, it is recommended that the built-in external drain be facing down to ensure proper drainage
should moisture enter the interior of the device.
Figure 3-3 - Recommended Drain Position
mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual
Page 17 of 23 (D998200546-10)