Shielding And Conditioning - Magtek mDynamo Installation And Operation Manual

2 - Electrical Integration
2.4

Shielding and Conditioning

MagTek recommends using shielded cables to provide noise immunity and to prevent radiated emissions.
The device itself has been tested by an FCC lab for Class B radiated susceptibility and has no special
shielding requirements. For details, see the FCC information provided at the beginning of this document.
MagTek also recommends that all communication cabling (i.e., USB) should be draped together where
possible, and isolated from any unrelated earth ground cables and other wiring nearby that could
potentially couple noise into the device.
The device has no special requirements for power conditioning or signal conditioning.
mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual
Page 14 of 23 (D998200546-10)