Electrical Integration; Overview - Magtek mDynamo Installation And Operation Manual

2 - Electrical Integration

2 Electrical Integration
2.1

Overview

This section provides information and guidelines for designing the electrical aspects of a solution that
incorporates mDynamo with Outdoor Bezel. MagTek strongly recommends vetting and testing solution
designs before finalizing and deploying them, to make sure the design meets all requirements (e.g.,
functional, legal, security, certification, safety, and so on).
When designing a solution that incorporates mDynamo with Outdoor Bezel, consider the following:
•
Review section 1.6 Magensa Web Services
•
Gateway
•
Data Protection
•
Remote Services
•
for an overall introduction to the device's physical features and what they are called.
•
Review section 3.4 Mounting for recommended mounting configuration.
•
Review Appendix A Technical Specifications to make sure the device is suitable for the solution.
•
Review safe handling practices in section 1.9 Handling to make sure the logistical aspects of the
solution design meet the device's handling requirements.
•
Develop solution-specific installation procedures and training materials before distribution to
installation technicians.
•
Review section 5 Maintenance and develop a maintenance procedure and schedule. When installed
in the solution-specific enclosure, the device may require additional maintenance not covered in the
general guidelines provided here.
mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual
Page 11 of 23 (D998200546-10)