Reset Settings - Neptune NPVS150 Basic Operation Manual

7.12 Short press
7.13 Press
priming function.
7.14 Short press
7.15 Press
7.16 Short press
7.17 Press

8. RESET SETTINGS

8.01 Whilst in Controller Settings, Press
8.02 Short press
8.03 Short press
This information is supplied as a guide only. Refer to the NPVS150 Pump
Installation & Operating instructions supplied with the pump for further
Neptune NPVS150 – Basic Operation Guide
to save setting.
to scroll through menu until PE: is displayed, this setting is to enable or disable
until digits flash.
or to enable priming (on) or disable priming (off).
to save setting.
and hold down for 3 seconds, this will now exit the controller settings.
until digits flash.
to reset settings.
information and more detailed instructions.
to scroll through menu until RESET: is displayed.
Page 6