Adjusting Speeds; Programming Timer Schedules 4 - Neptune NPVS150 Basic Operation Manual

5. ADJUSTING DEFAULT SPEEDS
5.01 Short press
whilst CL: Clock is displayed)
5.02 Press
5.03 Select which speed setting you wish to adjust by pressing
5.04 Short press
5.05 Short press
decrease rapidly. (This will not alter the saved settings)
5.06 Short press
5.07 Press
6. PROGRAMMING TIMER SCHEDULES
The NPVS150 has programmable timer schedules for speed settings 1 and 2. These schedules can be used as a
timer or to schedule speed run times coinciding with external time clock run times.
6.01 Short press
whilst CL: Clock is displayed)
6.02 Press
6.03 Press
displayed to set start time for Speed 2.
6.04 Short press
6.05 Press
6.06 Press
6.07 Short press
6.08 Press
or 2 F: displayed to set finish time for Speed 2.
Neptune NPVS150 – Basic Operation Guide
until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
and hold down for 3 seconds, this will now enter controller settings.
, press to scroll right and
or to increase or decrease the speed setting by 10 RPM. Long Press to increase /
to save setting.
and hold down for 3 seconds, this will now exit the controller settings.
until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
and hold down for 3 seconds, this will now enter the controller settings.
to scroll through menu until 1 o: is displayed to set start time for Speed 1 or 2 o:
until digits flash.
to scroll right and
or to change time.
to save setting.
to scroll through menu until is 1 F: is displayed on screen to set finish time for Speed 1
to scroll left between digits.
to scroll left between digits.
or or .
Page 4