Related Manuals for Neptune NPVS150
Summary of Contents for Neptune NPVS150
-
Page 1: Table Of Contents
Neptune NPVS150 Pump INDEX SECTION TOPIC PAGE # Starting the Pump Setting the Clock Selecting Speed Default Speeds Adjusting Speeds Programming Timer Schedules 4 & 5 Priming Settings 5 & 6 Reset Settings Neptune NPVS150 – Basic Operation Guide Page 1... - Page 2 9- Short press to alter and save any changes made to controller settings. 10- Press to scroll right and to scroll left between digits. 11- Press to increase / decrease settings. Neptune NPVS150 – Basic Operation Guide Page 2...
-
Page 3: Starting The Pump
Default Speed 2400 RPM - This speed should be used for a majority of suction cleaners connected to skimmer box. 4.03 Default Speed 3400 RPM - This speed should be used for backwashing sand filters and manual vacuuming. Neptune NPVS150 – Basic Operation Guide Page 3... -
Page 4: Adjusting Speeds
3 seconds, this will now exit the controller settings. 6. PROGRAMMING TIMER SCHEDULES The NPVS150 has programmable timer schedules for speed settings 1 and 2. These schedules can be used as a timer or to schedule speed run times coinciding with external time clock run times. -
Page 5: Priming Settings 5
Short press to increase or decrease the speed setting by 10 RPM. (minimum priming speed is 2900 RPM) Long Press to increase / decrease rapidly. (This will not alter the saved settings) Neptune NPVS150 – Basic Operation Guide Page 5... -
Page 6: Reset Settings
8.03 Short press to reset settings. This information is supplied as a guide only. Refer to the NPVS150 Pump Installation & Operating instructions supplied with the pump for further information and more detailed instructions. Neptune NPVS150 – Basic Operation Guide...