Advertisement
1- Press
to start and stop pump, for backwashing, to restore controller and to activate auto recovery.
2- Short press
3- Long Press
4- Press
or
5- Short press
Long Press to increase / decrease rapidly. (This will not alter the saved settings, pump will default back to
original setting on next cycle).
6- Long press
Clock is displayed).
7- Press
8- Press
or
9- Short press
10- Press
to scroll right and
11- Press
Neptune NPVS150 – Basic Operation Guide
FUNCTION KEYS
to scroll between Speed, Clock and Power Consumption displays.
when CL: (Clock) is displayed to alter and save clock times.
or
when in display mode to select default speed.
to increase / decrease default speed settings by 10 RPM when in display mode.
for 3 seconds to enter controller settings. (You cannot enter controller settings whilst CL:
scroll through controller settings.
or
when in controller settings to shortcut access the default speed settings.
to alter and save any changes made to controller settings.
to scroll left between digits.
to increase / decrease settings.
Page 2
Advertisement
