YILMAZ 300 User Manual page 61

USING CONVEYOR SUPPORT AT CLOSE AND FAR POSITIONS
a. Close Position

In order to cut parts in short dimensions, conveyor support should be used in close position.

Loosen the allen nuts on top of the conveyor support, move the support in close position, and then fix the nuts.

By pressing the

Press on "İleride" button in displayed screen. Position information is automatically updated.
b. Far Position

In order to cut parts in long dimensions, conveyor support should be used in far position.

Loosen the allen nuts on top of the conveyor support, move the support in far position, and then fix the nuts.

By pressing the

Press on "İleride" button in displayed screen. Position information is automatically updated.
CALIBRATION OF CONVEYOR

By pressing on

Enter the required password (12345678) in password area
button.

Close and far position of conveyor support should be calibrated separately.
button, open the screen in which support position is selected.
button, open the screen in which support position is selected.
button, the screen, in which calibration settings are made, is displayed.
and click on
61