YILMAZ 300 User Manual page 56

DISPLAYING THE REQUIRED DIMENSION
a. Manual Selection

By pressing
"MANUAL" is displayed on the button and light is in red color.

screen.

The recorded values (length, quantity, etc.) on the first line of the list are displayed on the screen.

After the required dimension is provided, conveyor support is located at demanded position by pressing the
operations.
Following the completion of operation, next program number is selected in
using the buttons located on left< and right> sides, and support is re-located at the demanded position.
button, machine is taken into manual transition mode. In manual transition mode,
The required program number is selected in the given figure which is part of the
button. When the support reaches the desired position, machine allows doing necessary
section by
56