Location; Setup - Hoshizaki KM-1601SRH Instruction Manual

Stackable crescent cuber
Hide thumbs Also See for KM-1601SRH:
Table of Contents

Advertisement

C. Location
1. This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F (+7°C to +38°C); Normal
operating water temperature should be within +45°F to +90°F (+7°C to
+3°C). Operation of the icemaker, for extended periods, outside of these
normal temperature ranges may affect icemaker performance.
. This icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to
go below 3°F (0°C). See "III.C. Preparing the Icemaker for Long Storage."
For best operating results:
• Icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• Avoid choosing a site where no dripping is allowed.
• Allow 6" (15 cm) clearance at rear, sides, and top for proper air circulation and ease of
maintenance and/or service should they be required.
• Location should provide a firm and level foundation for the equipment.
D. Setup
1) Unpack the storage bin, and attach the 4 adjustable legs provided (bin accessory) to
the bottom of the storage bin.
) Position the storage bin in the selected permanent location.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin using the  mounting brackets and the bolts
provided. See Fig. .
CAUTION
Icemaker
Mounting
Brackets
Bolts
Fig. 2
11
Bin

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-1601swhKm-1601srh3Km-1601swh3

Table of Contents