Operation; Technical Specifications - STEINEL Studioline 400 Operating Instructions Manual

L400_10spr.qxd

Operation

In order to switch on the
light without a heat source
in the detection zone,
switch the indoor power
switch momentarily. This
will activate the light for
the period selected.

Technical Specifications

Line voltage:
Power output:
Power consumption:
Detection angle of sensor:
Swivelling range of sensor:
ON time, adjustable:
Lighting threshold, adjustable:
Sensor range (dependent on sensor setting,
ambient temperature, and direction of approach)
From the front:
From the side:
Type of enclosure:
Ambient temperature:
18.02.2003 9:06 Uhr
Weather can affect the
function of the sensor light
fixture. Strong gusts of
wind, snow, rain or hail may
cause switching errors,
because the unit cannot
distinguish the sudden
change of temperature.
Seite 11
The Fresnel lens should be
periodically wiped clean
with a damp cloth if it gets
dirty.
Do not use any cleaning
materials.
220 – 240 V/50 – 60 Hz
max. 60 watts (no low-energy bulbs)
1.3 W
360° all-round lens
(with 120° angle of aperture)
2 x 40° in every direction
10 sec. to 15 min.
2 – 2,000 lux
12 m (40 ')
16 m (20 ')
IP 44, splashproof
– 25 °C to + 55 °C (– 13 °F to + 131 °F)
11