Navigating Menus; Console Screen Navigation Keys - ADC WorldDSL UTU-702C Quick Installation Manual

System Configuration
N
AVIGATING
Use the keys described in the following table to navigate the console screen
and its menus.
These Keys
Alpha-numeric
keys
and keys
↑ ↓
TAB
key
← →
and keys
CTRL + E
CTRL + X
+
CTRL C
CTRL + R
SPACEBAR
ESC
ENTER
14
M
ENUS

Console Screen Navigation Keys

Perform this Function
Type the underlined or highlighted letter to select and execute a menu
item. For example on the console screen menu bar, type
the Config drop-down menu.
Also use these keys to enter values in text fields. For example, on the
Config Date and Time menu, type the date in a DD/MM/YY format.
Press the key to access a console screen drop-down menu. For
↓
example, press the
menu. Or press the
ENTER
press to select the item. For example, press the
highlight Config Alarms, then press
Provides same function as the
Moves horizontally across the Menu bar, except when in a text entry
field.
CTRL E
+ moves up one line in the History screens.
CTRL + X moves down one line in the History screens.
CTRL + C performs the page-down function in the History screens.
CTRL + R performs the page-up function in the History screens.
Selects options displayed for current menu item. For example, to select
MANUAL or Nx64k AUTO mode from the Config System Settings
menu:
• press the key to highlight the HDSL Rate Mode option, then
↓
SPACEBAR
• press the
AUTO) is highlighted.
Exits the current screen and returns to the previous screen. Selection
changes made on the current screen are discarded. Press
in a text field to cancel the text entry and restore the old value.
Applies all selections on the current screen. For example, to select an
HDSL payload rate from the Config System Settings menu:
• press the key to highlight the HDSL Payload Rate option, then
↓
• type the desired number of time slots (1 to 32) and press
to display the selected HDSL payload rate (in MANUAL mode only).
June 14, 2002
↓ key on Config to access the Config drop-down
↑ and ↓ keys to highlight a sub-menu item, then
ENTER
↓ key.
until the desired option (MANUAL or Nx64k
700-702-900-04, Revision 04
C
to access
↓ key to
to view the sub-menu.
ESC
UTU-702C and ETU-752C List 1
while
ENTER