Yamaha MT-09 2021 Service Manual page 81

1. Frame
2. Fuel tank breather hose (fuel tank to canister)
3. Canister
4. Canister breather hose
5. Fuel tank drain hose
6. Canister purge hose (purge cut valve sole-
noid to canister)
A. Front side of the vehicle
B. Right side of the vehicle
C. Face the yellow paint mark on the canister
purge hose (purge cut valve solenoid to can-
ister) upward.
D. Install the clip with its end facing the down.
E. Insert each hose until it stops each part.
F. Install the clip with its end facing the rear.
G. Fit the fuel tank drain hose into the canister
holder as shown in the illustration.
H. Face the blue paint mark on the canister
purge hose (purge cut valve solenoid to can-
ister) upward.
I. Install the clip with its end facing the top.
J. Face the white paint mark on the fuel tank
breather hose (fuel tank to canister) upward.
2-54
CABLE ROUTING