Yamaha MT-09 2021 Service Manual page 15

Table of Contents

Advertisement

"Display Setting"
Display Setting
Lap Time
Tacho Color
This module allows you to switch the lap time
mode and tachometer color mode ON/OFF.
When the lap time mode is selected, the twin ve-
hicle information displays on the main screen
will display a lap timer and a lap counter. To exit
the lap time mode, the turn lap timer OFF in the
display setting module.
To change the tachometer to color mode, select
ON.
"Manual TCS Setting"
Manual TCS Setting
TCS
SCS
LIF
This module allows you to customize the "TCS-
MODE M" which is accessible on the main dis-
play using the MODE switches.
TCS
This model uses a variable traction control sys-
tem. For each setting level, the further the vehi-
cle is leaned over, the greater the amount of
traction control (system intervention) is applied.
There are 3 setting levels available for the "TCS-
MODE M".
Setting level 1 applies the least amount of over-
all system intervention, while setting level 3 ap-
plies the greatest amount of overall traction
control.
TIP
• TCS can only be turned on or "off" via the main
screen using the MODE switches.
• SCS and LIF can be turned off independently
of TCS for "TCSMODE M".
• When "TCS-MODE" has been set to "OFF" on
the main screen: TCS, SCS and LIF are all
turned off together.
OFF
OFF
km/h
1
1
1
km/h
1-6
SCS
SCS can be set to OFF, 1, 2, and 3.
OFF turns the slide control system off, setting
level 1 provides the least amount of system in-
tervention, and setting level 3 provides the
greatest amount of system intervention.
LIF
LIF can be set to OFF, 1, 2, and 3.
Setting level 1 provides the least amount of sys-
tem intervention and setting 3 most strongly re-
duces the rate of wheel lift.
OFF turns LIF off.
"Vehicle Setting"
Vehicle Setting
BC Setting
QS Setting
The vehicle setting module allows you to adjust
setting for the BC and QS systems.
BC
BC Setting
BC
The brake control system has two settings, BC1
and BC2. Select BC1 when only standard ABS
is desired. Select BC2 to have the brake control
system further regulate brake pressure while
cornering to suppress lateral wheel slip.
TIP
For skilled riders and when riding at the track,
due to varying conditions, the BC2 brake system
may engage sooner than expected relative to
your desired cornering speed or intended cor-
nering line.
FEATURES
km/h
2
km/h

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt-09sp 2021

Table of Contents