Step
Screw (quantity)
4
M2 × 3 mm, flat-head, nylon-coated (2)
When installing: Ensure that the connector is attached firmly.
1080 Speakers assembly
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 59
• "1060 Heatsink assembly" on page 65
Removal steps of the speakers assembly
When installing:
• Ensure that the connectors are attached firmly.
• Ensure that the cables are routed properly.
Color
Torque
Black
0.18±0.015 Nm
(1.85±0.15 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
67