Table of Contents
Advertisement
6) Connect an XLR dynamic microphone to the MIC input on the back of your HP60.
将XLR动圈麦克风连接到HP60背面的 MIC 输入。
7) Connect a pair of headphones to the Phones 1 output and turn its Level knob up to the
" 12 o'clock position".
将一副耳机连接到Phones 1的输出，并将其电平旋钮转到 "12点位置"。
8) Play a CD, session or other audio type typical to your studio through the source of
Input A (DAW or Mixer Outputs) and begin turning up the Input A knob until your
headphones are slightly above a comfortable / desired level.
通过输入A（DAW or Mixer Outputs）播放CD、会话或其他经典的音频类型，并
开始转动输入A的旋钮，直到你的耳机略高于一个舒适/理想的水平。
9) Turn the Channel 1 Mix knob fully clockwise (right). Repeat steps 7 & 8 for Input B
and the Talkback Microphone (You will need to press 'Talk' when setting mic level).
将 Channel 1 的 Mix 旋钮完全顺时针旋转（右）。为 Input B 和对讲麦克风重复7
和8步骤（在设置麦克风电平时，你需要按 "Talk"）。
External Input connection 外部输入连接
10)
For each of the headphone channels, connect the artist's instrument direct out from
your DAW or Mixer to the Stereo Ext. In connection on their respective channels.
对于每个耳机通道，连接艺术家的乐器从DAW或调音台直接输出到各自通道的
立体声输入接口。
(For Example: If a vocalist is on headphone channel 5, take the direct output
of their vocals from your DAW or Mixer and connect it to the channel 5 Stereo Ext.
In . Likewise, if a guitar player is on headphone channel 2, take the direct output of
their guitar from your DAW or Mixer and connect it to the channel 2 Stereo Ext.
In .)
( 例如：如果一个主唱在耳机通道 5 ，从 DAW 或调音台直接输出人声，并连接
到通道 5 的立体声外部输入。同样，如果一个吉他手在耳机通道 2 ，从 DAW
或调音台直接输出他们的吉他，并将其连接到通道 2 立体声外部输入）。
OPERATION 操作
6
Advertisement
Table of Contents
