Attach The Shaft; Attach The Auxiliary Handle - GreenWorks SSF405 Operator's Manual

EN
9.2

ATTACH THE SHAFT

11
6
If the button does not release fully in the location hole, the
shafts are not locked into position. Turn from side to side
until the button is locked into position.
1. Loosen the lock knob (12) on the coupler (11).
2. Align the release button (9) with the location hole (10)
and move the two shafts together.
3. Turn the upper shaft (8) until the release button (9) locks
into the location hole (10).
4. Tighten the lock knob (12).
8
9
10
12
12
NOTE
English
9.3 ATTACH THE AUXILIARY
HANDLE
8
7
13
8