Table of Contents
Advertisement
2. HANDLEBAR INSTALLATION
1. Loosen screws A and B.
*To confirm that the fork is in the right position, check if the brake disks
are on the same side of the bike.
3. Tighten A, B screws.
5. Place handlebar in stem and screw the bolts in.
* It is recommended to angle the brake handles at aprox. 45°
2. Rotate the handlebar riser 180° until it's perfectly perpendicular
to the bike axis.
4. Remove the 4 front stem bolts, then the stem cover.
6. Adjust handlebar to the desired height and tighten the 4 bolts.
11
DAXYS WOLF - USER MANUAL
Advertisement
Table of Contents
