How To Use - Panasonic MX-EX1031 Operating Instructions Manual

Blender
1
Place the ingredients into blender jug, and then close the lid.
● Pour liquid first, followed by soft ingredients and then others.
(i) Liquid (ii) Soft ingredients (iii) Hard ingredients (iv) Ice cubes
2
Attach blender jug to the motor housing.
①
Align the ▲ on the motor
housing with the ▽ on the
blender jug.
②
Twist blender jug clockwise
until you hear a click sound.
B lender jug only can be attached

by above steps.
3
Plug in. Hold the blender jug, and then turn the rotary
switch to " 1 " position to start.
● If the appliance stops
during operation. (P. EN8)
4
When blending is completed, turn the rotary switch to
" 0 " position to switch off. Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out
the ingredients.
How to use the scraper
● It can be inserted through the lid opening while blending without
interfering with the blender blade.
● Slide the scraper through the lid opening and scrape to remove food sticking to blender jug sides.
● To avoid ingredients splattering, it is recommended to insert the scraper from the lid opening
when using blender jug.
Scraper is useful when
● too little liquid makes ingredients hard to blend. (e.g. for dips, sauces, curry dishes)
● ingredients stick to the inner side of container. (e.g. garlic, chile pepper)
EN6
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 6 VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 6

How to Use

Dry mill
To disassemble
Turn anticlockwise
2
1
1
Turn the mill container upside down and place the
1
ingredients in it. Twist the mill container base
2
clockwise until you hear a click sound.
2
Attach the mill container to the motor housing.
①
A lign the ▲ on the motor
housing with the ▽ on the mill
2
container.
②
T wist mill container clockwise
until you hear a click sound.
M ill container only can be attached

by above steps.
3
1
3
Plug in. Hold the mill container, and then turn the rotary
switch to "1" position to start.
● If the appliance stops during
operation. (P. EN8)
3
4
When grinding is completed, turn the rotary switch to
" 0" position to switch off. Unplug.
4
Turn the mill container
anticlockwise to remove it,
1
open the mill container, and
2
take out the ingredients.
(MX-EX1011, MX-EX1031 only)
To assemble
Turn clockwise
Make sure the mill
gasket is not damaged
and placed properly
1
before assemble.
1
3
4
3
1
2
2021/11/11 14:30:01 2021/11/11 14:30:01
2
2
2
1