Table of Contents
Advertisement
Http://www.hybertone.com
a)
Connect a standard touch-tone analog telephone to the PHONE port.
b)
Insert a standard RJ11 telephone cable into the LINE IN port and connect the other
end of the telephone cable to a wall jack.
c)
Insert the Ethernet cable into the LAN port of HT-822P IP ADAPTOR and connect the
other end of the Ethernet cable to an uplink port (a router or a modem, etc.)
d)
Connect a PC to the PC port of HT-822P IP ADAPTOR.
e)
Insert the power adapter into the HT-822P IP ADAPTOR and connect it to a wall
outlet.
2.2 Connection Diagram
The interconnection diagram is as follows:
3 Basic Operations
3.1 Star Command
There are two types of Star Commands. One is factory predefined star command for
phone setup and information purpose. The other is for phone operation. The first digit of a
command must be "*" and the rest must be the natural number from 0 to 9. There are also
some commands with operands.
3.1.1 Star Commands for Phone Configuration
The star commands for phone configuration generally contains three digits or more. This
HT-822P VoIP FXS+PSTN Gateway
7
Advertisement
Table of Contents
Need help?
Do you have a question about the HT-822P and is the answer not in the manual?