Advertisement
Advertisement
Table of Contents
Related Manuals for Hybertone GoIP
Summary of Contents for Hybertone GoIP
- Page 1 QUICK INSTALLATION SMS Box for LabCollector Logger Add-on...
- Page 2 3. When the GSM channel of the GoIP is activated, this indicator is normally ON. 3 Page Setting Menu You can access the setting page of the GoIP gateway through the IP address of the LAN port or PC port. The default factory settings are as follows: 1/ The LAN port supports the DHCP (dynamic IP address).
- Page 3 Open the Internet Explorer and enter 192.168.8.1 or http://192.168.8.1 in the address bar, then, the login page is popped up for password input. Enter the login account (“admin” as default) in the User Name, and password (“admin” as default) in the Password field. Click “OK”...
- Page 4 Click the “Network Setting” in the menu on the left, and the following page is displayed: • Select Bridge mode in “PC Port” • If you select Static IP in the “LAN Port”, you should enter the information of your network. For easy settings, select DHCP in “LAN Port”. Now your GoIP is ready.
Need help?
Do you have a question about the GoIP and is the answer not in the manual?
Questions and answers