View Of The Appearance; Installation; Installation Steps - Hybertone HT-822P User Manual

HT-822P VoIP FXS+PSTN Gateway
Http://www.hybertone.com

1.6 View of the Appearance

1） Phone 1
It is connected with a standard touch-tone analog telephone.
2） Phone 2
It is connected with another standard touch-tone telephone.
3） LINE IN
It is connected with a standard telephone cable PSTN or VoIP.
4） LAN
It is used to connect the Ethernet cable.
5） PC
It is used to connect a computer or other terminal.
6） POWER DC24V/500mA
It is the power port, connected with the power adaptor.
Warning: The two type power adaptor are use by different kind's HT-822P, Please
don't mix up it.
7） Reset
It's used to reboot the terminal.

2 Installation

2.1 Installation Steps

The HT-822P IP ADAPTOR has two PHONE ports （Phone1， Phone 2） , one LINE IN port，
one NETWORK port and one PC port. The PHONE ports can register to the same SIP or
H.323 account or two different SIP or H.323 accounts.
Please follow the following steps to install an HT-822P IP ADAPTOR:
6