Specifications; Battery Installation - Teac CD-P1120 Owner's Manual

Remote-Controlled Operation
Remote Control Unit
The provided Remote Control Unit allows
the unit to be operated from a distance.
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit.
● Even if the remote control unit is operat-
ed within the effective range, remote
control operation may be impossible if
there are any obstacles between the
player and the remote control.
● If the remote control unit is operated
near other appliances which generate
infrared rays, or if other remote control
devices using infrared rays are used
near the player, the player may operate
incorrectly. In the reverse way, the
other appliances may operate incor-
rectly.

Battery Installation

1. Remove the battery compartment cover.
2. Insert two "AA" (R6, SUM-3) dry batter-
ies.
Make sure that the batteries are insert-
ed with their positive ≠ and negative
– poles positioned correctly.
3. Close the cover until it clicks.
Battery Replacement
If you notice that the distance between the
remote control unit and the player for cor-
rect operation becomes shorter, it indicates
that the batteries are exhausted. In this
case replace the batteries with new ones.
Precautions concerning batteries
● Be sure to insert the batteries with cor-
rect positive ≠ and negative – polari-
ties.
● Use batteries of the same type. Never
use different types of batteries together.
● Rechargeable and non-rechargeable
batteries can be used. Refer to the pre-
cautions on their labels.
● When the remote control unit is not to
be used for a long time (more than a
month), remove the batteries from the
remote control unit to prevent them
from leaking. If they leak, wipe away the
liquid inside the battery compartment
and replace the batteries with new
ones.
● Do not heat or disassemble batteries
and never dispose of old batteries by
throwing them in a fire.
– 10 –

Specifications

CD PLAYER
Pickup: 3-beam, semiconductor laser
D/A Converter: 1 bit DAC
Digital filter: 4-times oversampling 16 -bit
Analog filter: 3rd order Butterworth
Frequency Response: 20 Hz – 18 kHz ± 3dB
Total Harmonic Distortion: < 0.09 % (1 kHz)
Signal-to-Noise Ratio (S/N): >96 dB
Channel Separation: >80 dB (1 kHz)
Output: Analog; 2.0 Vrms (RCA)
Headphones; 110 mW / 32 ohms
Wow and Flutter: Below measurable limit
GENERAL
Power Requirements:
120 VAC, 60 Hz (U.S.A./ Canada
Model)
230 VAC, 50Hz (UK/Europe Model)
240 VAC, 50Hz (Australia Model)
Power Consumption: 12 Watts (AC)
Dimensions (W x H x D): 435 x104x290 mm
(17-1/8" x 4-1/8" x 11-7/16")
Net Weight: 3.5 kg
Standard Accessories:
Wireless Remote Control Unit
(RC-673), RCA pin-plug cord, Battery
(SUM-3, "AA", "R6" type) x 2 (Except
for U.S.A./Canada Model)
● Improvements may result in specifica-
tion or feature changes without notice.
● Illustrations may differ slightly from pro-
duction models.