Advertisement
Available languages
Available languages
English
CORDLESS 180MM ANGLE GRINDER
DCG440
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
E
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Max. Power Output
Rated speed
Wheel diameter
Wheel thickness (max)
Wire wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841‑2‑3:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a
h,DS
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
4
WALT one of the
E
V
DC
W
min
‑1
mm
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
=
m/s
2
m/s
2
=
m/s
2
m/s
2
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC‑Declaration of Conformity
o
Machinery Directive
DCG440
54
1
Cordless 180 mm Angle Grinder
Li‑Ion
DCG440
2300
WALT declares that these products described under
D
E
6500
Technical Data are in compliance with:
180
2006/42/EC, EN62841‑1:2015, EN62841‑2‑3:2021+A11:2021.
8
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
20
the following address or refer to the back of the manual.
M14
The undersigned is responsible for compilation of the technical
15.3
file and makes this declaration on behalf of D
2.6
87
95
Markus Rompel
Vice‑President Engineering, PTE‑Europe
3
WALT, Richard‑Klinger‑Straße 11,
D
E
65510, Idstein, Germany
01.11.2021
4.5
DECLARATION OF CONFORMITY
1.5
THE SUPPLY OF MACHINERY (SAFETY)
3.3
1.5
Cordless 180 mm Angle Grinder
DCG440
WALT declares that these products described under
D
E
"technical data" are in compliance with:
BS EN62841:2015, BS EN62841‑2‑3:2021+A11:2021.
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
REGULATIONS 2008
WALT at the following
E
WALT at
E
WALT.
E
Advertisement
