Advertisement
Available languages
Available languages
English
DCG440 ACCESSORIES CHART
Approved wheels for use wtih DCg440
Type 1 / T1
Type 27 / T27
non‑approved wheels for DCg440
Type 11 / T11
Type 27 Depressed Center grinding Wheels
Type 27 guard
(Shallow)
Type 27 depressed
center wheel
Locking flange
non‑hubbed sanding Flap Discs
Type 27 guard
(Shallow)
Non‑Hubbed sanding
flap disc
Locking flange
hubbed Wire Cup Wheels
Type 27 guard
(Shallow)
Hubbed wire
cup wheel
hubbed Wire Wheels
Type 27 guard
(Shallow)
Hubbed wire wheel
Type 1/41 Cutting Wheels
Type 1/41 guard**
Type 1/41 abrasive
cutting wheel
Locking flange
Diamond Cutting Wheels
18
Type 1/41 guard**
Diamond cutting
wheel
Locking flange
sanding Discs
Rubber backing pad**
Sanding disc
Sanding clamp nut
(Included with rubber
backing pad**)
hubbed Wheel Wrench
Hubbed wheel
wrench**
Type 1/41 guards are intended for use with Type
1/41 cutting wheels and Type 27 wheels marked for
cutting only. Grinding with wheels other than Type
27 and Type 29 require different accessory guards.
Always use the smallest proper guard possible that
does not contact the accessory.
** nOTE: Available at extra cost from your local dealer or
authorized service center.
Advertisement
