Silencing The Alarm; Snooze Function; Maximum/Minimum Temperature/Relative Humidity - Taylor 1743 Instruction Manual

SILENCING THE ALARM

While the alarm is sounding, press any button except the "SNZ" button or press and
hold the "SNZ" button for 3 seconds to silence the alarm.

SNOOZE FUNCTION

While the alarm is sounding, press the "SNZ" button once to activate the snooze
function. The alarm sounds again after the snooze time has passed.
In snooze mode, press any button except the "SNZ" button or press and hold the "SNZ"
button for 3 seconds to exit snooze mode.
NOTE: If the snooze function is set to OFF while the alarm is sounding, pressing "SNZ"
will not activate the snooze function.

MAXIMUM/MINIMUM TEMPERATURE/RELATIVE HUMIDITY

To toggle between indoor/outdoor maximum, minimum temperature and humidity
data...
Press the "MEM" button once to show the maximum temperature and humidity values.
Press the "MEM" button twice to show the minimum temperature and humidity values.
Press the "MEM" button three times to return to the current temperature and humidity
levels.
To reset the maximum and minimum temperature and humidity, press and hold the
"MEM" button for 2 seconds. This will reset all minimum and maximum data recorded to
the current displayed values.
NOTE: If the temperature reading is below range, "LL.L" will be displayed. If the
temperature reading is above range, "HH.H" will be displayed.
LOW BATTERY INDICATOR
If the battery icon "
If the battery icon "
prompting the low battery warning and replace the corresponding Wireless Outdoor
Sensor battery.
" appears in the "IN" column, replace the Base Station battery.
" appears in the "OUT" column, confirm which channel is
9