Taylor 1732 Instruction Manual

Indoor Comfort Level Weather Station
Model 1732
Simple, reliable, accurate...the weather station allows you to monitor indoor conditions and provides an indoor
Comfort Level reading.
NOTE: Some units have a static cling label over the digital display. Please remove before use.

BATTERY INFORMATION

The weather station is powered by 2 AAA batteries (not included). Remove the battery compartment cover
located on the back of the unit. Install 2 AAA batteries according to the polarity markings. Replace the battery
compartment cover.
Replace the batteries if readings grow dim or irregular. Always replace both batteries at the same time; do not
mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.)
batteries.
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If
swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the
unit will not be used for a long period of time.

DISPLAYING YOUR WEATHER STATION

Place the unit indoors in a well-ventilated location away from direct sunlight.
Pull out the Table Stand on the back of the unit to stand upright on a flat surface.

HOW TO READ YOUR WEATHER STATION

The weather station displays current indoor temperature and humidity. It also combines temperature and
humidity readings to offer a gauge of the indoor comfort level.
Indoor temperature readings – these are temperatures at the weather station location. The temperature
display is located in the bottom left of the LCD screen.
Indoor humidity readings – these are the relative humidity readings at the weather station location. The
humidity display is located in the bottom right of the LCD screen.
The unit will update temperature, humidity and comfort level readings approximately every 20 seconds.
Press the "°C/°F" button on the back of the weather station to switch between Fahrenheit or Celsius
temperature displays.
Notes: If the temperature is higher than the range of the unit, the temperature display will show "HH.H" and
the humidity display will show "--". If the temperature is lower, the temperature display will show "LL.L" and
the humidity display will show "--". If the humidity is higher than the range of the unit, the display will show
"HH". If the humidity is lower, the display will show "LL".