Summary of Contents for Furniture of America CM-AC103
Page 1
Assembly Instructions CM-AC103 ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench (Included) assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
Page 3
Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List Page 3 of 7...
Page 4
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note: Every cam lock bolt must have a cam lock connector in order to fasten the parts together. Secure the threaded end of Align the cam lock the cam lock bolt by using a bolt with the pre- drilled hole.
Page 5
Repeat Step 1 for the assembly of the legs (#1-3 & Step 2 #1-4) and the left panel (#2). #A-1 x 4 pcs #A-2 x 4 pcs #E x 4 pcs Insert 3 cam lock bolts (#A-1) onto the leg (#1-4). Insert 2 wood dowels (#E), 2 cam lock bolts (#A-1) Step 3 AND 6 cam lock connectors (#A-2) onto the rear...
Page 6
#A-1 x 5 pcs #A-2 x 10 pcs Step 4 #D x 2 pcs #E x 2 pcs Insert 2 wood dowels (#E) AND 3 cam lock bolts (#A-1) onto the left panel (#2). Insert a total of 2 cam lock bolts (#A-1) onto the legs (#1-3 &...
Page 7
Insert 6 wood dowels (#E) and 9 cam lock bolts (#A-1) onto the top panel (#8). Insert a total of 9 cam lock connectors (#A-2) onto the Step 6 left/right panels, the rear apron and the center drawer panel (#2, #3, #4 &...
Need help?
Do you have a question about the CM-AC103 and is the answer not in the manual?
Questions and answers