Making Basic Measurements; Measuring Voltage - KPS DCM8500PV User Manual

Making Basic Measurements

! CAUTION
When connecting the test leads to the DUT (Device Under Test) connect the common
test leads before connecting the live test leads ; when removing the test leads, remove
the live test leads before removing the common test leads.

Measuring Voltage

Dial the switch to select the
measuring function.
APO
APO
APO
Measuring PV Voltage
Dial the switch and
press the Function button
to select AC/DC mode.
PV String
! CAUTION
This function is only available with the dedicated PV test probe.
Always select correct DC / AC mode to perform high voltage measurement. This meter
will flash symbol and the correct mode symbol (AC / DC) if the input voltage is
different and dangerous.
AC
V
+
COM
DC
V
DC
mV
APO
+
APO
COM
View side
03
EN
AC
V
DC
V