Advertisement
Quick Links
Advertisement
Related Manuals for KPS DCM3000
Summary of Contents for KPS DCM3000
- Page 1 DCM3000 SKU: KPSDCM3000CBINT TRMS clamp meter 1000A AC Instructions manual...
-
Page 2: Table Of Contents
DCM3000 TABLE OF CONTENTS 1. Safety information ..................14 2. List of contents .................... 15 3. Description ....................16 4. Operating Guidance ..................17 5. Maintenance ....................21 6. Specifications ....................22 MGL INTERNATIONAL wants to thank you for choosing our product. Please... -
Page 3: Safety Information
DCM3000 1. Safety information 1.1. Preliminary WARNING Be extremely careful when using this meter. Improper use of this device can result in electric shock or destruction of the meter. Take all normal safety precautions and follow the safeguards suggested in this manual. To exploit full functionality of the meter and ensure safe operation, please read carefully and follow the indications in this manual. -
Page 4: List Of Contents
DCM3000 2. List of components Digital clamp meter Silicone test leads 1,5m Pouch 3xAAA 1.5V batteries Instructions manual Calibration guarantee - 15 -... -
Page 5: Description
DCM3000 3. Description 3.1. Part name (1) Current clamp head: used for current measurement. (2) Clamp head light (3) Panel (4) Trigger (5) Function choice button (FUNC) (6) Relative measurement button (7) Range selection button (8) LCD display (9) Common end jack... -
Page 6: Operating Guidance
DCM3000 3.2 Switch, buttons and input Jack description Used for Reading hold or back light control Used for switching manual measuring range state. Used for entering relative Measurement state Used for maximun/mínimum Measurement function switch Used for measuring function switch Transfer switch: used for selecting function and measuring range OFF position used for shutting off the power. - Page 7 DCM3000 1) For using the maximum/minimum value measurement mode, the manual range mode must be active. 4.4 Function Switch 1) In the voltage mode, press “FUNC” button for changing to DC or AC current type. 4.5 REL Measurement 1) REL button is relative value Measurement button. The current display value can be stored in the memory as reference value.
- Page 8 DCM3000 4.9 Current measurement WARNING Electric shock Hazard. Remove the probe from the meter before mesuring with current clamp 1) Measuring switch is placed to position A. At this time, the meter is in AC current measurement state. Choose appropriate measuring range.
- Page 9 DCM3000 4.11 Resistance Test WARNING Electric shock hazard. When measuring circuit impedance, determine that the power supply is disconnected and the capacitor in the circuit is completely discharged. 1) Insert black probe to COM jack, insert red probe to INPUT jack.
-
Page 10: Maintenance
DCM3000 4.14 NCV Measurement 1) Turn the meter to NCV mode 2) Place the meter top close to the conductor. When test voltage is greater than 110Vac (T-RMS), the meter´s LED indicator will blink and the buzzer will give an alternating high-low alarm sound. -
Page 11: Specifications
DCM3000 6. SPECIFICATIONS Measuring range Resolution Accuracy 0.01A AC CURRENT 600A 0.1A ±(2.0% reading + 8 digits) 1000A 60mV 0.01mV 600mV 0.1mV 0.001V ±(0.5% reading + 5 digits) DC VOLTAGE 0.01V 600V 0.1V 1000V ±(0.5% reading + 5 digits) 60mV 0.01mV...