Making Basic Measurements - KPS DMM3000 User Manual

Features :
•6,000 count digital and 60 segments analog display
•Large white LED backlight display
•True RMS measurements on ACV
•LoZ for prevent false reading from ghost voltage
•AutoVolt automatic AC/DC voltage selection
•Auto Ranging
•0.5% DCV accuracy
•Smart Hold
•Peak Hold for capture peak readings
•Relative Function
•Auto Power Off (can be disabled)
•Capacitance measurements
•Frequency Counter on ACV
•Diode Test
•Frequency Counter on ACA
•10Amp ACA/DCA
•11A/1000V High Energy Fuse
•VoltSeekTM for non-contact voltage detection
•EasyStickTM holster with built in magnetic sticker
•ContiVisionTM for visible continuity beeper
•Battery Capacity indication in segments
•Included Holster with Probe Holder, Tilt Stand and Magnetic
sticker
•CAT IV 600V/ CATIII 1000V standard

Making Basic Measurements

Preparation and Caution Before Measurement
Observe the rules of
!
CAUTION
!
When connecting the test leads to the DUT (Device Under Test)
connect the common test leads before connecting the live test
leads ; when removing the test leads, remove the live test leads
before removing the common test leads.
Warnings and
!
4
EN
Cautions.
!