Table of Contents
Advertisement
13.1
13.2
13.3
Reisemobil - 06/02-2 - GLO-0005-00EN
Inspection work
Like any technical appliance, the vehicle must be inspected at regular inter-
vals.
This inspection work must be carried out by qualified personnel.
In the inspection record for the housing body in this instruction manual, the
Globecar dealer confirms what work has been performed.
Have chassis inspections confirmed in the chassis manufacturer's customer
service booklet.
Note the inspections listed in the inspection record and have them carried
out at the specified intervals. The value of the vehicle is thus preserved.
The inspection record also serves as valid proof in the case of damage and
claims under the guarantee.
Maintenance work
As with every machine, this vehicle requires maintenance. The extent and fre-
quency of the maintenance work required depend on conditions of operation
and use. More difficult operating conditions make it necessary to service the
vehicle more often.
Have the base vehicle and the appliances serviced at the intervals specified
in the corresponding instruction manuals.
Replacing bulbs and fluorescent tubes
Bulbs and light fittings can be extremely hot. Therefore, allow lights to
cool down before changing bulbs.
Store bulbs in a safe place inaccessible to children.
Do not use any bulb that has been dropped or which shows scratches in
its glass. The bulb might burst.
Lights can get very hot. When the light is switched on, there must always
be a safety distance of 30 cm between light and flammable objects. Fire
hazard!
A new bulb should not be touched with the fingers. Use a cloth when
installing the new bulb.
Only use bulbs of the same type and with the correct wattage.
13
Maintenance
13Maintenance
87
Advertisement
Table of Contents
