Tables; Suspension Table With Fold-Out Leg (Without Table Extension); Suspension Table With Fold-Out Leg (With Table Extension) - Globecar 2 Win Instruction Manual

7.6.1
Conversion to bed
foundation:
7.6.2
Extending:
Reducing size:
Reisemobil - 06/02-2 - GLO-0005-00EN
7.6

Tables

Suspension table with fold-out leg (without table extension)

Fig. 24 Bed foundation
The table's fold-out leg enables it to be used as a bed foundation.
Lift the front of the table-top (Fig. 24,1) by approx. 45°.
Pull the lower part of the table leg (Fig. 24,2) down and fold through 90°.
Remove the table-top from the upper retainer.
Hook the table-top at a 45° angle to the supports into the lower retainer
(Fig. 24,3) and place on the floor with the upper part of the table leg.

Suspension table with fold-out leg (with table extension)

Fig. 25 Extend suspension table
The suspension table size can be enlarged by inserting a table-top extension.
Undo the knurled screws (Fig. 25,2).
Lift the table-top slightly and pull out it out as far as possible. The table
extension (Fig. 25,1) is fully extended.
Set down the table.
Insert the table-top extension in the table extension.
Lift the table-top slightly and push it back as far as possible.
Tighten the knurled screws.
Undo the knurled screws (Fig. 25,2).
Slightly lift the front of the table-top and pull out.
Remove the table-top extension and store it.
Lift the table-top slightly and push it back as far as possible. The table
extension (Fig. 25,1) is fully retracted.
7
Living
39