Table of Contents
Advertisement
7
Living
Closing:
7.1.3
Opening:
Closing:
Condensation
30
Close the external flap and press it shut.
Insert key into locking cylinder (Fig. 5,1) and turn a quarter turn in a clock-
wise direction.
Remove the key.
Cap for the fresh water filler neck
Fig. 6
Cap for the fresh water filler
neck
The fresh water filler neck is marked by the symbol "
labelled by the word "WASSER" (water).
Insert the key in the locking cylinder (Fig. 6,2) and turn it in an anticlockwise
direction.
Remove the cap.
Insert the cap in the fresh water filler neck.
Turn key in a clockwise direction.
Remove the key.
7.2
Ventilation
The oxygen in the vehicle interior is used up by breathing or the use of
the gas cooker or other appliances. That is why the oxygen needs to be
replaced on a constant basis. For this purpose, forced ventilations are
fitted in the vehicle. Never cover or block forced ventilations with objects
such as e.g. a winter mat. Keep forced ventilations clear of snow and
leaves. There is a danger of suffocation due to increased CO
Although sufficient ventilation is provided, in certain weather conditions,
condensation can form on metal objects (e.g. screwed connections in the
floor).
Additional cold spots can occur at thermal "bridges" (e.g. skylight edges,
sockets, filler necks, flaps, etc.).
Ensure that there is a continuous exchange of air by providing frequent and
efficient ventilation. This is the only method for ensuring that condensation is
not formed during cool weather. During the colder season, a pleasant living cli-
mate is created if heating output, air distribution and ventilation are synchro-
nized. To avoid draft close the air outlet nozzles on the dashboard and set the
" (Fig. 6,1) or
levels.
2
Reisemobil - 06/02-2 - GLO-0005-00EN
Advertisement
Table of Contents
