Advertisement
ASSEMBLY
16
With runner side facing out, attach the Left Drawer Side
the Small Drawer Back
narrow groove at the bottom runs continuously along the
inside of both pieces.
Repeat to attach the Right Drawer Side
Begin assembling the second drawer using the same method.
Hardware Required:
Q
Slide the Small Drawer Bottom
groove in the drawer panels.
Insert the Cam Bolts in the Small Drawer Front
the front edges of the Drawer Sides. Secure by
inserting a Cam Nut
on the outside of the Drawer Sides. Use a Phillips-head
screwdriver to turn the Cam Nuts clockwise to secure
the Cam Bolts.
Finish assembling the second small drawer using the
same method.
Hardware Required:
T
using 2 Screws
R
to the Drawer Back.
?
Screw (4x35mm) x8
T
x 2
U
into place in the
2
into each of the adjoining holes
2
Cam Nut x8
to
Q
?
. Ensure that the
R
S
into
Insert Cam Bolts
1
into the indicated holes
in each Small Drawer Front
head screwdriver to tighten the threads fully
into the panels.
Hardware Required:
1
S
U
2
x 2
S
. Use a Phillips-
1
Cam Bolt x8
1
x 2
2
S
11
Advertisement
