Logging In To The Neteco - Huawei SMU11B User Manual

SMU11B Site Monitoring Unit
User Manual
Table 3-1 IP parameters
Main Second-
Menu Level
Menu
System Network
Settings Config
Step 4 Set IP addresses and port numbers for the active and standby NetEco servers on
the WebUI.
Table 3-2 NetEco parameters
Main Second-
Menu Level
Menu
System NetEco
Settings
----End

3.1.2 Logging In to the NetEco

Procedure
Step 1 Enter https://NetEco IP address: port number for NetEco login (for example,
https://10.10.10.1:31943) in the address box of the browser and press Enter. The
NetEco login page is displayed.
Issue 03 (2022-06-06)
Third-Level Default Value
Menu
IP Address 192.168.0.10
Subnet Mask 255.255.255.0
Default 192.168.0.1
Gateway
Third-Level Menu Default Value
NetEco Primary IP 192.168.0.10
NetEco Backup IP 192.168.0.10
NetEco Port 31220
Number
Copyright © Huawei Technologies Co., Ltd.
3 NMS Management
Setting
Set this parameter based on the
address assigned by the network
administrator.
Set this parameter based on the
address assigned by the network
administrator.
Set this parameter based on the
address assigned by the network
administrator.
Setting
Set this parameter to the IP
address of the active NetEco
server.
Set this parameter to the IP
address of the standby NetEco
server.
31220
NOTE
Contact Huawei technical support if
you need to change the port
number.
13