Maintenance And Remote Terminal; Table 8. Maintenance And Remote Terminal Menus - ADC HRU-419 HiGain User Manual

150-419-100-03>
M
AINTENANCE AND
The Maintenance and Remote terminal menus have five view-only
performance screens for viewing system performance.
function of each screen.

Table 8. Maintenance and Remote Terminal Menus

Screen
View Span Status
Set Clock*
System Settings
View Performance
Data
View Performance
History
View Alarm History Allows you to view alarm conditions between the
(*) Set from the Maintenance Terminal menu only
After the maintenance terminal has been properly configured, you can press
the SPACEBAR
configuration, one of the following two screens display.
HRU-419 List 1
R
EMOTE
Function
Allows you to monitor the HDSL line between the
HLU and the HRU-419 span (non-doubler
applications), and the HLU, HDU and HRU-419,
Spans 1 and 2 (for one doubler applications), and
Spans 1, 2 and 3 (for two doubler applications).
Allows you to set both the time and the date
parameters at the HLU, and to update the same
settings at the HRU-419.
Allows you to view all system settings.
Allows you to view the Errored Seconds (ES) and
Unavailable Seconds (UAS) between the HLU and
the HRU-419 span (non-doubler applications), and
the available spans (doubler applications) in
15-minute intervals over a four-hour time period.
Allows you to view the ES and UAS between the HLU
and the HRU-419 span (non-doubler applications)
and the available spans (doubler applications) in
24-hour intervals over a seven-day period.
HLU and the HRU-419 span (non-doubler
applications) and the available spans (doubler
applications).
several times to invoke the autobaud feature. Based on your
September 25, 1998
T
ERMINAL
Table 8
Installation
describes the
23