Table of Contents
Advertisement
• The mains adapter serves as a separator
between the product and your mains
supply. The mains supply must be close
to the device and easily accessible.
• This device has been tested for typical
applications where the device is carried
on the body. To meet the RF exposure
requirements, the minimum distance
between the body, in particular the
user's head, and the handset including
the antenna must be 0 cm. Belt clips,
holsters and similar accessories
from third parties used with this
device must not contain metallic
components. Accessories carried
on the body that do not meet these
requirements may not meet the RF
exposure requirements and should be
avoided. Only use the device's built-in
antenna or an approved antenna.
• This device complies with the essential
requirements and other relevant
provisions of UK Radio Equipment
Regulations (S.I. 2017 No. 1206).
All the important radio test
cases have been written.
• Caution: Risk of explosion if the
battery is replaced by the wrong
type. Dispose of the used batteries
according to the instructions.
• The device complies with RF
specifications when the device
is 5mm from the body.
ENGLISH-30
› Intended use
• This phone is robust and designed for
mobile use. However, it still needs to be
protected from moisture (rain, bathroom
water, etc.) and heavy impacts.
• It is only designed for European
network standards (AT, BE, CZ, DE,
DK, ES, FI, FR, GB, HR, HU, IE, IT, NL,
NO, PL, PT, SE, SI, SK, SZ and TR).
• Do not leave it where it will be
directly exposed to the sun.
• Using it for any purpose other than
that described above will result in
damage to the product. Doing this
also entails hazards such as fire,
electric shocks, etc. This product must
not be changed or modified, and
the casing must not be opened.
• The adapter is only suitable for use in
conjunction with a standard household
mains socket that is connected to your
electrical grid and uses 100-240 volts,
50/60Hz (10/16A), of alternating voltage.
Advertisement
Table of Contents
