Sony DCR-SR32E Manual page 18

3. Origin Oscillation Check
Check the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.
Subject Not required
Measurement Point R2108 (Pin B3 of IC2101)
on VC-489 board
Measuring Instrument Frequency counter
f = 12000000 ± 240 Hz
Specified value
Switch setting
1) POWER ............................................................. MOVIE mode
Checking method:
1) Check that the frequency (f) satisfies the specified value.
R2108
VC-489 board (SIDE A)
IC2101
Fig. 6-1-10
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
4. VIDEO Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. S VIDEO OUT Y Level Adj.
3. S VIDEO OUT Chroma Level Adj.
4. VIDEO OUT Level Check
5. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the [Start] button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the "1. Data
Setting during Video Adj.".
3) If "1. Data Setting during Video Adj." completed successfully,
the following screen is displayed during the execution of "2. S
VIDEO OUT Y Level Adj.". Using the [Up]/[Down] button on
the screen, adjust so that the Y signal level satisfies the speci-
fied value. After the adjustment, click the [End] button in the
screen.
6-16