Charging For Headset; Charging For Charging Case - K-Mate BTH171Q Manual

2. Charging for headset

When the headset is low on power, it emits "Battery low" once every 2
minutes andthered Ledflashes slowly 4 times in a row every 1 minute .
Please recharge the battery of the headset.
The way of charging for the earbuds as following:
1. Put the earbuds into the charging case to ensure that the charging pins
connect well, and start charging when you see the red indicator light of
the earbuds on.
Red light on: Charging
Red light off: Finish charging
2. Charging should be completed in roughly 1.5 hours.
Remarks:
The left and right earbuds on charging case of an arbitrary charge can be
◆
charged.
Please cover the charging case cover, so that the earbuds and the
◆
charging case connect well when it is charging.
When the earbudsare not put into charge case, the indicator light of
◆
charging case is off. When the earbudsare put into charging case, the
white indicator light of the charging case will light up and indicate the
power of the current charging case:
White LED flashes once every 2 seconds = low battery power;
White LED flashes three times every 2 seconds = sufficient battery power;
White LED remains on = full battery power;
After removing the earbuds from the charging case, the indicator LED of the
charging case will automatically extinguish after 1 minute.

3. Charging for charging case

When any of the following situations occurs, it indicates that the charging
case will be low power. You need to charge the charging case:
1)
Put the earbuds into the charging case, and find that the white indicator