◼ Brief introduction BTH171Q is a True Wireless Bluetooth Headset ,each ear piece comes with a Microphone that can be used individually or used together for stereo sound.The earbudsare equipped with a charging case, which is convenient to carry and charge.
2. Charging for headset When the headset is low on power, it emits “Battery low” once every 2 minutes andthered Ledflashes slowly 4 times in a row every 1 minute . Please recharge the battery of the headset. The way of charging for the earbuds as following: 1.
Page 5
light of the charging case flashes once every 2 seconds. It means that the charge case is low power. When the indicator light of the charging casedoesn’t turn on and the earphone cannot be charged, it means that the battery of the charging case has been used up The charging case supports USB cable charging and wireless charging.
◼ Getting started 1. Wearing headset a. Choose the suitable size ear tips b. Ensure each earbuds is worn on the correct ear. “L” should be worn on the left ear and “R”worn on the right ear. Left ear Right ear 2.One earbud connecting with cellphone Each earbuds can be connected singly to the cellphone.
Page 7
. Once your earbuds are in pairing mode, you should be able to see it in the list of Bluetooth devices. You should see BTH171Q-L for left earbuds or BTH171Q-R for the right earbuds appear in your contactable devices list.After successful connection, the earbuds prompts "Phone is connected".
3.Two earbuds connecting with cellphone In this mode use two earbuds at the same time to enjoy stereo sound. 1)Turn on the master earbud (BTH171Q-L) and connect it with you Bluetooth device,then power on the other earbud and it will connect with each other automatically.
4.Earbuds pairing/connecting Please use this step if two headset can not be connect with each other. 1.Turn off two earbuds respectively(don’t put them into the charging case). 2.Clear the pairing list: Choose one of the earbuds. Firstly, enter the pairing mode.Then hit the touch button 5 times, while the red LED and the white LED turns on for 1 second.
5.Function operation-use one earbud 1. music Status of Prompt Function earbuds tone Double-click Double-click Play Pausing Dang touch-button touch-button Playing Double-click Double-click Pause Dang music touch-button touch-button Previous Playing Press Left touch - Dang song music button about 2s Playing Press Right touch - Next song Dang...
Page 11
Volume Once-click During a call Dang down touch-button 6.Function operation----two earbuds connecting with cellphone 1. music Status of Prompt Function earbuds tone Double-click Double-click Play Pausing Dang touch-button touch-button Playing Double-click Double-click Pause Dang music touch-button touch-button Previous Playing Press Left touch - Dang song music...
SIRI device touch-button Once-click Volume up During a call Dang touch-button Volume Once-click During a call Dang down touch-button 3. Gang control to power off When using two earbuds, either earbud of the left or right turns off, and the other earbud will be turned off at the same time.
8. Meaning of indicator light indicator light Prompt tone Earbuds Red and white LED flash Pairing mode with phone quickly alternately Red and white LED flash TWS pairing mode slowly alternately White LED flashes every 5 Unconnected seconds White LED flashes twice Connected every 10 seconds Red LED flashes four times...
◼ Care and maintenance Read the following recommendations carefully before using BTH171Q. Following these you will be able to enjoy this product for many years. Keep it dry and don’t put it in the dump place to avoid the product’s ◆...
4. Why can’t I hear the sound clearly on the headset? a) Make sure the mobile phone is in the strong signal area; b)Make sure the headset is in the available range. and no other block。 5. Why the pause/play, last/next song not function when playing music? Make sure your Bluetooth device supports AVRCP (Audio/Video Remote Control profile) ◼...
Page 16
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.