Fisher FSK-180B-EU Operating And Installation Instruction Manual page 29

1） ON/OFF（Fig.4）
Press the "ON/OFF" button, the unit will start running.
Press the "ON/OFF" button again, the unit will stop
running.
2）Fan Control (Fig.5 is about display region and the
same as following figures.)
When press FAN button once, the fan speed will be changed
as follow:
In DRY mode: the fan speed will be set at low automatically.
3）Temperature Setting (Fig.6)
Press the setting temperature button:
▲：For temperature increase
▼：For temperature decrease
（Press this button once, the temperature will be increased or
decreased by 1 . ℃ ）
Note: Press ▲+ ▼button for 5 seconds, "EE" will appear
where SET TEMP is displayed and all buttons are shielded.
Press ▲+▼button again for 5 seconds to cancel locked
function.
If long-distance monitoring controller or central controller
shield displayer, all buttons and signals from remote
controller will be shielded too, and CC will be displayed
where SET TEMP is displayed.
26
SWING
TIMER
Fig.4
TIMER
Fig.5
TIMER
Fig.6