Using The Automatic Adjustment Feature; Adjusting The Position - Hitachi CP-X308 User's Manual And Operating Manual

Operating

Using the automatic adjustment feature

1.
Press AUTO button on the remote control.
Pressing this button performs the following.
 For a computer signal or MIU signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture
may still be incorrectly adjusted. Use a bright picture when
adjusting.
 For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (33). The vertical position
and horizontal position will be automatically set to the default.
 For a component video signal
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input. When this
function is performed for a video signal, a certain extra such as a line may
appear outside a picture.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION
menu (45).

Adjusting the position

1.
Press POSITION button on the remote control when no menu
is indicated.
The "POSITION" indication will appear on the screen.
2.
Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press RESET button on
the remote control during the operation.
To complete this operation, press POSITION button again.
Even if you do not do anything, the dialog will automatically
disappear after a few seconds.
● When this function is performed on a video signal, s-video signal or component
video signal, some image such as an extra-line may appear at outside of the picture.
● If POSITION button is pressed when a menu is indicated on screen, the displayed
picture does not move its position but the menu does.
0
AUTO button
COMPUTER
VIDEO SEARCH
BLANK
ASPECT AUTO
MAGNIFY
PAGE UP VOLUME
HOME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON
KEYSTONE
1 2
POSITION MENU
ENTER
RESET
ESC
COMPUTER
VIDEO SEARCH
BLANK
ASPECT AUTO
MAGNIFY
PAGE UP VOLUME
HOME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON
KEYSTONE
1 2
POSITION MENU
ENTER
RESET
ESC
POSITION button