Hitachi CP-X308 User's Manual And Operating Manual page 54

MIU menu
MIU menu (continued)
Item
LIVE MODE
SETTING
(continued)
(continued on next page)
54
The Presenter Mode that is set
in the Live Viewer 3 software
installed into your PC can be
turned to off.
A message, QUIT PRESENTER MODE, will be
displayed in about 3 seconds when the function is
performed. The function is available only when the
Presenter Mode is set to on in the Live Viewer 3
software.
QUIT
The current setting of the Presenter Mode is shown in
PRESENTER
the menu.
MODE
• The Presenter mode is a function that allows the
projector to display an image sent by 1 PC only, even
though the MIU feature on this projector support Multi
PC mode.
• If the projector is required to display an image sent
by other PC, execute the QUIT PRESENTER MODE
function.
• See the User's Manual – Network Guide for details.
(84)
The projector supports the Single
PC mode that displays an image
on full screen sent by 1 PC, and
the Multi PC mode that divides the
screen into 4 zone and displays
images in each zone sent by up
to 4 PCs. The MULTI PC MODE
function switches these modes.
SINGLE
Use the ▲/▼ buttons to select an item, and the ENTER
or INPUT button to perform the item. The mode will
MULTI be switched from the Multi PC mode to the Single PC
PC mode and the quarter screen identified in the menu will
MODE
be displayed on full screen.
MULTI
Use the ENTER or INPUT button to perform the item.
The mode will be switched to the Multi PC mode and
the screen will be divided to 4 zones.
• If the Presenter Mode is set to on in the PC whose
image is currently displayed on screen, a message,
QUIT PRESENTER MODE, will be displayed in about 3
seconds when the function is performed.
• The function is available when there is any PC
connected to the projector in the Multi PC mode set in
the Live Viewer 3 software.
Description