Using An Usb Storange - Hitachi CP-X308 User's Manual And Operating Manual

Setting up
Connecting your devices (continued)
Using a USB storage
In order to view images stored in a USB storage, such as a USB memory, insert the device
into the USB STORAGE slot.
Before removing the USB storage, be sure to perform the REMOVE MEDIA procedure
using the PC-LESS PRESENTATION menu under the MIU menu.
Using an SD card
In order to view images stored in an SD storage,
such as an SD memory card, insert the device
into the SD card slot. Or, in order to use the
wireless network function, load the internal clock
battery (68) and insert the designated wireless
network card into the SD card slot.
Inserting the SD card
1.
Make sure that the power code is not plugged into
the projector for the wireless network card only.
2.
Remove the SD card slot cover. To remove it, it might be recommended to hook the
edge of its side face upward.
3.
Slowly insert the SD card completely into the SD card slot. Make sure that the angled
corner of the SD card is placed into the right side of the SD card slot, while inserting.
4.
Replace the SD card slot cover. It is recommended that the cover is slid sideways to
the projector.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.
1.
Open the two plates of the slot cover lock to put the tips of two plates together, and then insert the
tips to the lock hole of the SD card slot cover.
2.
Put the body of the two plates together. Then, hook a padlock or combination lock to
the hole of the slot cover lock.
Removing the SD card
1.
Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu
under the MIU menu for SD Storage card only.
2.
Turn the projector off and unplug the power code from the projector for the wireless
network card only.
3.
Remove the SD card slot cover. After taking the SD card away, replace the SD card
slot cover.
WARNING
► Do not touch the SD card while being accessed.
CAUTION
wireless network function of this projector.
►The wireless network card is not permitted to be sold or used in some
countries and regions. Use the card only in the country or region where you buy
it. For more information, contact to your dealer.
NOTE
• When using the projector with a wired LAN, please remove the
wireless network card.

►Do not disassemble or modify the projector and accessories.
►The designated wireless network card is required to use the
SD card slot cover
SD CARD
Slot cover lock
SD CARD