Hitachi CP-X308 User's Manual And Operating Manual page 59

MIU menu (continued)
Item
SETUP
(continued)
(continued on next page)
(2) To change an already
inserted character,
press the ▲/▼ button
to move the cursor
to one of the first 2
lines, and use the ◄
/► buttons to move the
cursor on the character
to be changed. After
pressing the ENTER
or INPUT button, the
character is selected.
SSID
Then, follow the same
(continued)
procedure as described
at the item (1) above
(3) To finish entering text, move the cursor to the SAVE
on screen and press the ENTER or INPUT button.
To revert to the previous SSID without saving
changes, move the cursor to the CANCEL on screen
and press the ENTER or INPUT button.
Use the ▲/▼ buttons to select the
transfer rate.
(M : Mbps : Megabits per second)
AUTOó54Mó48Mó36Mó24Mó18M
ô
SPEED
1Mó2Mó5.5Mó6Mó9Mó11Mó12M
• The AUTO mode automatically selects
the optimum rate.
• Transfer rates may change due to the
network situation.
Use the ▲/▼ buttons to select the
network mode.
WIRELESS ó WIRED
• The network mode will be initialized whenever the
NETWORK
power is turned on with the power switch.
MODE
• The WIRELESS will be enabled when the wireless
network card is inserted.
• The WIRED will be enabled when the wireless
network card is not inserted.
Description
MIU menu
ô
59