MIU menu
MIU menu (continued)
Item
PC-LESS
PRESENTATION
(continued)
SETUP
(continued on next page)
56
Use the ▲/▼ buttons to select
an image or a folder, and press
the ENTER button to display
DIRECTORY
the image or turn into the
THUMBNAIL.
To open or close the folder, press
the ►/◄ buttons.
Use the ▲/▼ buttons to set the
DISPLAY
display size.
SIZE
Use the ▲/▼ buttons to
select key configuration from
KEY
the 2 patterns.
CONFIG.
Use the ▲/▼ buttons to select
REMOVE
a remove mode, and then the
MEDIA
ENTER or ► button is pressed so
the menu will appear.
• Also these items can be set with Web Remote Control (Refer to
Network Guide) except REMOVE MEDIA.
Selecting this item displays the MIU SETUP
menu.
Use the ▲/▼ buttons to select an item, and
the ► or ENTER button on the remote control
to perform the item.
Use the ▲/▼ buttons to turn DHCP on/off.
ON ó OFF
DHCP
Select OFF when the network does
(Dynamic
not have DHCP enabled.
Host
• When the "DHCP" setting changes to "ON", it takes a
Configuration
little time to obtain IP address from DHCP server.
Protocol)
• Auto IP function will be assigned an IP address if the
projector could not obtain an IP address from server
even if DHCP is "ON".
Description