Table of Contents
Advertisement
Original tape (camcorder)
1
3
IN
OUT
IN OUT
Edited tape (VCR)
Recording Start/Stop Button
MENU Button
PAUSE (6) Button
STOP (5) Button
REW (2) Button
Remote Sensor
STOP
PAUSE
R.A.EDIT
ON/OFF
VCR REC STBY
RM-V716U
(provided with
OR
GR-SXM460A/
SXM46EA only)
2
IN
OUT
Power Switch
ON/OFF
RM-V700U
(optional)
AUTOMATIC EDITING TO VCR
9
Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE (6).
10
Point the remote control towards the VCR's infrared
sensor and press VCR REC STBY (q6), or manually
engage the VCR's Record-Pause mode.
11
Press MENU on the camcorder to begin Automatic
Editing, and the previously selected scenes are copied
to the VCR in the specified order.
While editing, the R.A. Edit counter of the scene
which is being copied is shown with a blinking
highlight.
•Pressing START/STOP on the remote control does
not start editing.
12
When all selected scenes have been copied, the
camcorder and VCR enter the Still or Pause mode.
Press STOP (5) on both units. To make the R.A. Edit
counter display disappear, press R.A.EDIT ON/OFF
(RM-V716U)/ON/OFF (RM-V700U).
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
● If you performed step 1
CONNECTIONS"), keep the remote control pointed at
the VCR during editing.
● The on-screen display only appears while the camcorder
searches for each scene.
● There may be noise at in- or out-points on the edited
tape with certain VCRs.
47
EN
on page 45 ("MAKE
Advertisement
Table of Contents
