Table of Contents
Advertisement
Remote sensor
Zoom Buttons
SHIFT
Left Button
Right Button
RM-V716U
(provided)
Press T
Normal playback
Playback Zoom (GR-SXM460A/SXM46EA
only)
To magnify the recorded image up to 10X at any time
during playback.
NOTES:
● Use the RM-V716U remote control unit to perform this
procedure.
● Make sure that the TBC mode is activated (
1
2
Up Button
To move the image on screen around to find a particular
Down
portion of the picture . . .
Button
.... while holding down SHIFT, press
PLAY
PAUSE
To End Zoom . . .
STOP
.... press and hold W until magnification returns to
NOTES:
● Zoom can also be used during still playback.
● Due to digital image processing, the quality of the image
may suffer.
● After zooming in on a still video image, when normal
playback is started, the zoomed-in effect is momentarily
cancelled but then resumes, returning magnification to
the previously set level.
To move image,
press
(Right)
while keeping
SHIFT held down.
Press PLAY to find the scene of interest.
Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
(Up) and
(Down).
normal. Or, press STOP and then press PLAY.
41
EN
pg. 34).
(Left),
(Right),
Advertisement
Table of Contents
