Table of Contents
Advertisement
40
EN
1
2
+
–
A
2
1
B
2
1
Knob
1
Remote sensor
USING THE REMOTE CONTROL UNIT
3
Tab
–
+
1
3
Lock hole
3
Transmitted beam
effective area
Installing The Batteries
(RM-V716U , provided with
GR-SXM460A/SXM46EA only)
The remote control uses two "R03 (AAA)" size batteries.
See "General Battery Precautions" (
1
Open the battery compartment cover as illustrated.
2
Insert two "R03 (AAA)" size batteries in the correct
direction.
3
Replace the battery compartment cover.
Installing The Battery
(RM-V700U, optional)
The remote control uses one lithium battery (CR2025).
1
: Pull out the battery holder while sliding the lock
hole.
: Pinch the release tab and pull out the battery
holder.
2
Insert the battery in the holder, and be sure to have
the "+" mark visible.
3
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(
pg. 2).
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
(cont.)
pg. 49).
Advertisement
Table of Contents
